Temperature

Temperature products measure signals from sensors such as thermocouples and resistance temperature detectors (RTDs). Use these products to acquire, condition, and digitize signals in varied temperature ranges and environments.

01

TEMPERATURE

Platform Modules and Controllers

Platform modules and controllers integrate with modular hardware platforms that allow you to combine different types of modules in a custom system that leverages shared platform features.

NI offers three hardware platforms—CompactDAQ, CompactRIO, and PXI—though all platforms may not be represented in this category.

USB Temperature Measurement Bundle

USB Temperature Measurement Bundle

The USB Temperature Measurement Bundle includes a CompactDAQ Chassis with the C Series Temperature Input Module for temperature measurements.

The USB Temperature Measurement provides a portable, USB-based sensor measurement system with features such as anti-aliasing filters, open-thermocouple detection, and cold-junction compensation for high-accuracy thermocouple measurements.

Learn more

C Series Temperature Input Module

C Series Temperature Input Module

Takes measurements from thermocouples and resistance temperature detectors (RTDs) for CompactDAQ or CompactRIO systems.

The C Series Temperature Input Module features up to 16 channels of temperature input from either thermocouples or RTDS. This module can include anti-aliasing filters, open-thermocouple detection, and cold-junction compensation. Additionally, the module also feature isolation for safety, noise immunity, and high common-mode voltage range.The C Series Temperature Input Module includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.

Learn more

C Series Universal Analog Input Module

C Series Universal Analog Input Module

Provides analog input channels for voltage, current, temperature, and strain measurements in CompactDAQ or CompactRIO systems.

The C Series Universal Analog Input Module helps you perform multi-purpose measurements. This module includes built-in support for accelerometer, powered sensor, full-bridge, and voltage measurements as well as quarter-bridge, half-bridge, 60 V, and current measurements using measurement-specific adapters. You also can choose options to measure signals from sensors such as strain gages, resistance temperature detectors (RTDs), thermocouples, load cells, and other powered sensors.The C Series Universal Analog Input Module includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.

Learn more

PXI Temperature Input Module

PXI Temperature Input Module

Takes measurements from thermocouples and resistance temperature detectors (RTDs) for PXI systems.

The PXI Temperature Input Module features up to 32 channels of analog temperature measurements. This module support both high-speed and high-resolution modes. You can program channel configurations and scale measured data into engineering units. Some models include autozero channels for offset compensation as well as open thermocouple detection to identify disconnected thermocouples, while others support 2-, 3-, or 4-wire resistance temperature detector (RTD) measurements.The PXI Temperature Input Module includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.

Learn more

Temperature Input Device for FieldDAQ

Temperature Input Device for FieldDAQ

Measures thermocouples in rugged environments. FieldDAQ™ devices are dust- and water-resistant and offer TSN technology for simplified distribution.

The Temperature Input Device for FieldDAQ measures up to 16 thermocouple channels. The module features cold-junction compensation and open thermocouple detection with an LED indicator per channel to identify disconnected thermocouples. Additionally, the module incorporates Time Sensitive Networking (TSN), which provides tight synchronization over a distributed network of data acquisition nodes without additional cabling or complex programming. The device also features an integrated network switch and built-in power circuitry for simple daisy chaining.The Temperature Input Device for FieldDAQ includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.

Learn more

Temperature Input Module for Remote I/O

Temperature Input Module for Remote I/O

Provides thermocouple input channels for remote I/O systems. Remote I/O modules must be used with a supported NI real-time controller.

The Temperature Input Module for Remote I/O features a features a thermocouple input range of ±100 mV and a voltage input range of ±5 V. It also has an adjustable filter time for improved measurement quality and optional external CJC or PT100 RTD measurements.A remote I/O system consists of an EtherCAT bus coupler and individual modules mounted on a DIN rail. You control the Temperature Input Module for Remote I/O from a real‐time controller, such as a CompactRIO Controller or an Industrial Controller. You can use remote I/O hardware to add low‐cost I/O for simple tasks while your controller handles advanced tasks such as image processing, motion control, and high‐speed or specialty measurements.

Learn more

02

TEMPERATURE

Stand Alone or Computer Based Devices

Stand-alone or computer-based devices either integrate with standard desktop and laptop computers or allow you to use them without the need for other modular hardware.

Temperature Input Device

Temperature Input Device

Takes temperature measurements from several types of thermocouples in a small, portable form factor.

The Temperature Input Device is a thermocouple measurement device featuring InstantDAQ technology. InstantDAQ technology includes built-in software for viewing and logging data that automatically loads when you plug in the device, so you can instantly take temperature measurements with your PC. You can connect the Temperature Input Device to any USB port to use your PC as a display and monitor data in real time. The device is compatible with J, K, R, S, T, N, E, and B thermocouples.The Temperature Input Device includes the NI-DAQmx driver and configuration utility that simplify configuration and measurements. NI-DAQmx supports NI programming environments as well as Python, ANSI C, C#.NET, and MathWorks MATLAB® software.

Learn more

ENOX TECHNOLOGIES

Offer Request Form

Enox Teknoloji